Heating and Cooling Brampton – Reliable HVAC Services & 24/7 Support
Aire One Peel Heating & Cooling repairs, installs and maintains furnaces, air conditioners and heat pumps in homes and businesses across Brampton, from Mount Pleasant and Springdale to Bramalea, Heart Lake and Castlemore. We are a Carrier Factory Authorized Dealer and a TSSA-registered fuels contractor, and we service every major brand, whoever installed it.
Go straight to the Brampton page you need: furnace repair Brampton, air conditioner repair Brampton or heat pumps in Brampton. Our head office is in Mississauga, so Brampton homeowners can also see our furnace repair Mississauga, AC repair Mississauga and furnace installation Mississauga pages, or call 905-564-8545 for same-day service in Brampton.
Furnace Repair in Brampton
No heat, short cycling, a burner that lights and then shuts off, or a furnace that blows cool air: call 905-564-8545 and tell us what the furnace is doing and any error code on the board. A technician runs a full diagnostic, gives you a written price before the repair starts and, when the part is on the truck, finishes the repair in the same visit. Same-day service is available in most of Brampton.
If the furnace is older and the repair is a major one, we also price a replacement so you can compare. See our furnace repair Brampton page for the common faults, and how repairs are priced on our furnace repair Mississauga page.
Furnace maintenance in Brampton
A yearly tune-up before the heating season catches most of the problems that turn into no-heat calls in January: a dirty flame sensor, a weak igniter, a plugged condensate drain or a cracked heat exchanger. The visit includes a combustion and safety check, cleaning of the burners and flame sensor, a filter check and a test of the safety controls. Our protection plans include an annual preventative maintenance and tune-up.
Furnace Installation and Replacement in Brampton
When repairs no longer make sense, Aire One Peel installs new high-efficiency furnaces across Brampton, from Mount Pleasant and Springdale to Bramalea and Heart Lake. As a Carrier Factory Authorized Dealer and TSSA-registered fuels contractor, we size the furnace to your home, remove and dispose of the old unit, handle the paperwork, and register your warranty. Most Brampton furnace installations are completed in a single day.
What a Brampton furnace installation includes: a free in-home estimate with a written quote, a properly sized Carrier high-efficiency furnace, removal of the old equipment, safety and combustion testing, thermostat set-up, and a walkthrough of your new system. Rent-to-own and financing options are available, and we will tell you if a current Ontario rebate applies to your project.
Not sure whether to repair or replace? Call 905-564-8545 for a same-day assessment, or compare options on our furnace installation and rent or buy a furnace pages.
Air Conditioner Repair and Installation in Brampton
AC repair: an air conditioner that runs but does not cool, freezes up, leaks water indoors or trips its breaker usually has a refrigerant, airflow, drain or electrical fault. We diagnose it, quote it in writing and repair all major brands. See air conditioner repair Brampton for the common faults.
AC installation: many newer Brampton homes are large two-storey houses where the upstairs runs warm. Sizing the new air conditioner to the house, rather than copying the old one, matters more than the brand: a unit that is too large cools fast, shuts off early and leaves the house damp. We measure the home, check the ductwork and quote a properly sized Carrier system, with financing and rental options. Compare renting or buying an air conditioner, or see what drives air conditioner installation cost.
AC maintenance: a spring tune-up covers cleaning the outdoor coil and checking the refrigerant charge, the capacitor and contactor, the drain and the airflow, so the system is ready before the first heat wave.
Heat Pump Installation in Brampton
A cold-climate heat pump heats and cools the same house with one system. Many Brampton homes keep their gas furnace as backup, a hybrid or dual-fuel setup: the heat pump carries the heating load for most of the winter and the furnace takes over in a deep freeze. We size the system to the house and check the electrical panel and the ductwork first, and we tell you plainly if either needs work before a heat pump makes sense. See heat pumps in Brampton, the cost to install a heat pump in Ontario and how they perform in cold Ontario weather.
Heat Pump Repair and Maintenance in Brampton
An outdoor unit locked in solid ice, cool air in heating mode that does not clear after a few minutes, short cycling or a tripped breaker all need a technician. Steam during a defrost cycle and mild supply air are normal. Refrigerant work is done only by certified refrigeration mechanics, as Ontario requires. Our heat pump repair page lists the symptoms, the likely causes and what to do before you call, and a yearly tune-up keeps the defrost controls, the coils and the refrigerant charge in check.
Why Book a Yearly Tune-Up
- Fewer no-heat and no-cooling calls: most breakdowns start as small faults that a tune-up catches.
- Lower energy use from clean burners, coils and filters.
- A safety check of the heat exchanger, the venting and the carbon monoxide risk.
- Documented maintenance, which manufacturers can ask for on a warranty claim.
- A longer working life for the equipment.
An HVAC Company That Serves Brampton
We serve Brampton from our head office at 1625 Courtneypark Dr E in Mississauga, a short drive south of the Brampton border. You deal with one company for repair, installation, maintenance, financing and rentals: a Carrier Factory Authorized Dealer and TSSA-registered fuels contractor with a 4.9-star Google rating. If you are comparing companies, our guide to choosing the best heating company in Brampton lists what to check.
Permits, Utilities and Rebates in Brampton
- Permits: the City of Brampton does not require a building permit to replace an existing forced air furnace where there are no alterations to the existing duct work. New or re-routed ductwork and other changes to the heating or ventilation system do need a permit, and we tell you before the work starts if yours does.
- Gas and electrical work: gas connections are made by certified gas technicians, and the Electrical Safety Authority must inspect new electrical work, such as the circuit for a heat pump or an air conditioner.
- Utilities: Brampton homes are served by Alectra Utilities for electricity and Enbridge Gas for natural gas, which is what the rebate programs ask about.
- Rebates: Ontario’s Home Renovation Savings program, delivered by Enbridge Gas and Save on Energy, offers rebates on heat pumps and other upgrades. Amounts depend on how the home is heated and they change; see our guide to HVAC rebates in Ontario for the current figures.
Last reviewed: September 18, 2026
Contact Us to Schedule a Consultation
Brampton
Areas We Serve
Frequently Asked Questions About Heating and Cooling in Brampton
What size furnace do I need for a 2,500 square foot house in Brampton?
Most southern Ontario homes need roughly 30 to 45 BTU per hour for every square foot, so a 2,500 square foot house usually lands between 75,000 and 90,000 BTU per hour if it is newer and well insulated, and between 100,000 and 115,000 if it is older or average. Nine-foot ceilings and vaulted great rooms, common in newer Brampton subdivisions, push the number toward the top of the range. The real figure comes from a room-by-room heat loss calculation to the CSA F280 standard, done in your home, which weighs insulation, window area and orientation, air tightness, ceiling heights, a finished basement and the duct layout. Never size a replacement by copying the rating on the old furnace, because that unit was often oversized on installation day.
We finished our basement. Can the furnace and ducts we already have handle it?
The furnace almost always has the capacity; the ductwork usually does not. Builders rough in the minimum number of basement supply vents and often no dedicated return air at all, so a finished lower level runs cold and stale while the upper floors overheat. Adding supply runs, at least one proper return and a full rebalance fixes it far more reliably than buying a larger furnace. Before anyone quotes you new equipment, ask for airflow and static pressure to be measured, because a duct problem does not get better with a bigger furnace attached to it.
Is a two-stage or modulating furnace worth it in a larger Brampton home?
Usually yes in a larger or two-storey home, because staging fixes the comfort problems a single-stage furnace creates. A single-stage unit runs at full output every time it starts. A two-stage furnace runs at reduced output in ordinary weather and full power only during cold snaps, which is the practical sweet spot for most Peel homes. A modulating unit adjusts between roughly 40 and 100 percent and pairs with a variable-speed blower for steadier temperatures and quieter operation. Above 96 percent AFUE you are mostly buying comfort rather than fuel savings, so choose the staging for how the house feels, not for the efficiency number alone.
Will the thermostat the builder installed work with a two-stage or modulating furnace?
Often not properly. Builder thermostats are usually basic single-stage models with only enough wiring to call for heat or cool, so a two-stage or modulating furnace ends up running at full output every cycle and you lose the comfort you paid for. Staged equipment needs a matching thermostat, a common wire for power, and commissioning so the stages are actually switched on. When you compare quotes, ask for the thermostat model to be named in writing and ask whether staging was enabled and verified at start-up.
Why does our house still feel damp when the air conditioning is running?
Usually because the air conditioner is oversized for the house. A unit that is too large cools the air around the thermostat quickly and shuts off before it has pulled much moisture out, so the rooms reach temperature and still feel clammy. Open stairwells and nine-foot ceilings, common in newer Brampton subdivisions, make it more noticeable because the cooled air stratifies. The fix is a load-calculated size and a two-stage or variable-speed unit that runs longer at lower output, which removes far more humidity than a big unit in short bursts.
Do you offer 24/7 emergency furnace and air conditioning repair in Brampton?
Yes. Aire One Peel is available 24 hours a day, seven days a week for no-heat and no-cooling emergencies in Brampton, with no after-hours charge. Call 905-564-8545 and describe what the system is doing, any error code on the thermostat or furnace board, and how long it has been happening. Same-day service is available in most of Brampton for non-emergency work. We are a Carrier Factory Authorized Dealer and service every major brand, whoever installed it.
Do I need a City of Brampton permit to replace my furnace?
Usually not. The City of Brampton does not require a building permit to replace an existing forced air furnace where there are no alterations to the existing duct work. Changes to the heating or ventilation system, such as new or re-routed ductwork, do need a permit, and the Electrical Safety Authority must inspect new electrical work, for example the circuit for a heat pump or an air conditioner. Gas connections must be made by a certified gas technician. We confirm what applies to your home before the work starts.
Are there rebates for Brampton homeowners who install a heat pump?
Brampton homeowners can apply to Ontario’s Home Renovation Savings program, delivered by Enbridge Gas and Save on Energy, which offers rebates on heat pumps and other energy upgrades. Amounts and rules depend on how the home is heated and they change, so check the current figures in our guide to HVAC rebates in Ontario before you budget. We check which rebates your project qualifies for as part of the quote.