November 16, 2026

Aire One Peel Heating & Cooling · Mississauga and Peel Region · Updated November 2026

What Does HVAC Service Include? Service, Maintenance and Repair Explained

TSSA-Registered Fuels Contractor Carrier Factory Authorized Dealer
Mario Vaghei, General Manager of Aire One Peel Heating and Cooling

By Mario Vaghei, General Manager, Aire One Peel Heating & Cooling · Published November 16, 2026 · Facts verified November 12, 2026

Short answer

"HVAC service" is the umbrella term for a technician's visit to your heating, ventilation or air conditioning system. It usually means one of three things: maintenance, a pre-season check-up that cleans, tests and adjusts a working system; a repair, which starts with a diagnosis of something that has stopped working; or an installation. A maintenance visit on a furnace checks the gas connections, burner combustion and heat exchanger; on an air conditioner it cleans the coils and checks the refrigerant level; on every system it checks the controls, electrical connections, moving parts and drain. Natural Resources Canada suggests heating check-ups in the fall and cooling check-ups in the spring.

Technician checking a high-efficiency gas furnace during a service visit
A service visit can be maintenance on a working system or the diagnosis of a breakdown.

Service, maintenance and repair are not the same visit

VisitWhenWhat happensWhat you get
Maintenance (check-up, tune-up)Before the season, on a working systemClean, test, adjust; check safety controlsA report and any recommendations
RepairWhen something has stopped workingDiagnose the cause, then fix itA repaired system and the part replaced
InstallationNew or replacement equipmentSize, install, start upA new system and its warranty papers
InspectionBefore buying a house, after a repair, for a planLook and test without repairsA written condition report

Table: our summary, using Natural Resources Canada's maintenance guide for the check-up contents.

What a maintenance visit includes on every system

Natural Resources Canada's guide to maintaining a home heating and cooling system lists the items a contractor checks on any system:

  • Check the thermostat settings so the system keeps you comfortable at home and saves energy while you are away.
  • "Tighten all electrical connections and measure voltage and current on motors."
  • "Lubricate all moving parts." Friction raises the energy the system uses.
  • "Check and inspect the condensate drain in your central air conditioner, furnace and/or heat pump."
  • "Check all the controls to ensure the system runs safely and properly."

The heating side: before winter

For a furnace, NRCan's list adds: "Check all gas (or oil) connections, gas pressure, burner combustion and heat exchanger." Poor connections, a dirty burner or a cracked heat exchanger make the system less safe and less efficient. Enbridge Gas recommends a yearly furnace inspection with a TSSA-registered HVAC contractor. The full item-by-item list is in our furnace tune-up checklist. For what Aire One Peel's own visit covers, see furnace maintenance in Mississauga.

The cooling side: before summer

For an air conditioner or a heat pump in cooling mode, NRCan adds three items: "Clean evaporator and condenser air conditioning coils"; "Check your central air conditioner's refrigerant level and adjust if necessary"; and "Clean and adjust blower components to provide sufficient airflow and greater comfort levels." NRCan's air conditioning guide adds that "The best time to service a central air conditioner is just prior to the cooling season." A heat pump gets both lists, because it heats and cools; our heat pump maintenance guide covers it.

What a repair visit includes

A repair starts with a diagnosis. The technician confirms the symptom, checks power and controls, and then tests the parts that could cause it. The fix comes after the cause is found: replacing a part without knowing why it failed can leave the real problem in place. If your air conditioner is the one that has stopped cooling, our guide to an AC that is not cooling lists the common causes and the checks you can do first.

What you can do between visits

NRCan's homeowner job is the filter: inspect, clean or change it regularly in your central air conditioner, furnace or heat pump, following the owner's manual for how often. "A dirty filter can raise energy costs and damage the system." Keep vents clear and the area around the furnace free of stored items.

When to call us

For a seasonal check-up or a repair, call 905-564-8545 or book air conditioner repair in Mississauga.

Frequently asked questions

What does HVAC service mean?

A technician's visit to a heating, ventilation or air conditioning system. It usually means maintenance on a working system, a repair after a breakdown, or an installation.

What is included in HVAC maintenance?

Natural Resources Canada lists checking the thermostat settings, tightening electrical connections and measuring motor voltage and current, lubricating moving parts, checking the condensate drain and checking all controls; plus gas connections, gas pressure, burner combustion and the heat exchanger for heating, and coil cleaning, the refrigerant level and blower adjustment for cooling.

How often should HVAC be serviced?

Once a year per system type: Natural Resources Canada suggests heating check-ups in the fall and cooling check-ups in the spring, and Enbridge Gas recommends a yearly furnace inspection.

What is the difference between HVAC maintenance and repair?

Maintenance cleans, tests and adjusts a system that is working, before the season. A repair diagnoses and fixes a system that has stopped working or is failing.

What can I do myself between HVAC service visits?

Inspect, clean or change the filter regularly as the owner's manual says, keep vents clear, and keep the area around the furnace free of stored items.

Sources and references

Questions about your system? Call 905-564-8545. Aire One Peel is a TSSA-registered fuels contractor (FS R0076624709) and Carrier Factory Authorized Dealer serving Mississauga, Brampton, Etobicoke, Milton, Georgetown, Caledon and Bolton.